DS3800NBID1E1D

Product Description

The DS3800NBID1E1D is a bridge interface circuit board. It was created by General Electric. The DS3800NBID1E1D is a component in the Speedtronic Mark IV series of turbine controls.

The DS3800NBID1E1D contains eighteen (18) integrated circuits. Identified by the reference designator U, these integrated circuits are spread all over the board. Located around the board are many capacitors in red and silver, red, and blue. These capacitors are identified by the reference designator C. Much of the DS3800NBID1E1D is taken up by a variety of resistors which are identified by the reference designator R. The resistors are banded and vary in color. The bands on each resistor indicate the resistance ability of each device. At the top left corner of the DS3800NBID1E1D is an orange LED, which stands for light-emitting diode. This diode is identified by the reference designator CR, as CR5. Other diodes which do not emit light are located around the board and are also identified by CR. Aligned on the top of the board is an arrangement of twenty-two (22) test points identified with the reference designator TP. The DS3800NBID1E1D has two (2) resistor networks which are identified by the reference designator RN, as RN1 and RN2. A long connector port is located on the bottom edge of the DS3800NBID1E1D. Having this connector port allows for other boards or other parts to be connected to the board.

AX Control is committed to customer service and quality of all parts sold. If any technical support is necessary, it is advised to contact GE.