About the DS3800NCBA1A1B
The DS3800NCBA1A1B is a component board for turbine controls. This part was made by General Electric. The DS3800NCBA1A1B is part of the Speedtronic Mark IV turbine control series. The Speedtronic Mark systems have been relied on for superior turbine control for decades, beginning with the very first Mark I system.
The DS3800NCBA1A1B features eight (8) blue potentiometers on the right side of the board. Potentiometers are also known as variable resistors. They can be used to adjust the resistance of a component. These potentiometers are labeled with the reference designator RH, from RH1 to RH8. Next to the potentiometers is writing which reads “mount polarity bands”. The DS3800NCBA1A1B contains forty-seven (47) capacitors which are all labeled with numbers. The letters A through J are labeled along the top edge of the DS3800NCBA1A1B. The DS3800NCBA1A1B has two (2) resistors near the top of the board. These resistors are striped in bands which indicate resistance capacity of each resistor. The resistors are labeled with the reference designator R, as R20 and R21. The DS3800NCBA1A1B features a connector port which spans the left edge of the board. Using this port, additional parts or boards can be connected to the DS3800NCBA1A1B. Adjacent to the port are the numbers ten (10) through eighty (80) by tens. Written all over the DS3800NCBA1A1B are the letters A through Z.
AX Control is dedicated to customer service and excellent quality of products. All parts sold will arrive in packaging which will dispel any static energy before the part is handled by the user.
