DS3800NCCB1H1F

About the DS3800NCCB1H1F

The DS3800NCCB1H1F was produced as part of the Speedtronic Mark IV series for turbine control. This circuit board is an auxiliary circuit board that is manufactured by General Electric. The DS3800NCCB1H1F board is an important part of the Speedtronic Mark IV turbine control series.

Covering much of the DS3800NCCB1H1F board are a number of resistors in various colors and patterns. The resistors are covered in colored bands which indicate the resistance capacity of each resistor. Several black diodes are grouped together in various places around the board. Many yellow capacitors of all different sizes can also be seen on the DS3800NCCB1H1F. The DS3800NCCB1H1F has 18 integrated circuits. Contained on each integrated circuit are very small parts such as diodes, capacitors, and resistors among other parts. The DS3800NCCB1H1F also features 4 resistor networks. Inside each resistor network is a group of resistors. Adding up the total resistance of all the resistors inside gives you the total resistance of each resistor network. On one side of the DS3800NCCB1H1F are 4 light-emitting diodes. These particular diodes, or LEDs, emit an orange light when they are functioning. Between the LEDs, there is a group of 15 test points. Testing the board using these test points helps to ensure that the board is working properly. A connector port is located on one edge of the DS3800NCCB1H1F board. Situated in the center of the DS3800NCCB1H1F is a separate connector port which is also used to connect parts to the board.

Each product from AX Control is shipped packaged in an anti-static bag which dissipates all static energy that may accumulate during shipping.