About the DS3800NDAD1H1C
** AX Control suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3800NDAD1H1C was initially provided by General Electric.
The DS3800NDAD1H1C is part of General Electric’s Speedtronic Mark IV series. The DS3800NDAD1H1C has a small thin metal divider on the side of the Variable Resistors. The DS3800NDAD1H1C has one small thing yellow capacitor and three average-size yellow capacitors. The capacitors generate an electrical field. The electrical field is then used to store excess energy for the DS3800NDAD1H1C to use at a later time. The DS3800NDAD1H1C has twenty-five yellow diodes, four grey diodes, three black diodes, and one yellow LED (light emitting diode). The DS3800NDAD1H1C has two sets of metal pins with orange covers. The DS3800NDAD1H1C has a mixture of nineteen integrated circuits. The integrated circuits are used to hold the programming data for the DS3800NDAD1H1C. There are two types of integrated circuits the EPROM and the EEPROM. The EEPROM cannot be altered when the EPROM can be updated as new programming becomes available. The DS3800NDAD1H1C has around twenty small blue resistors with colored bands on the outside. The DS3800NDAD1H1C has eight Variable Resistors or Potentiometers. The Variable Resistors on the DS3800NDAD1H1C are small and large in size. The Variable Resistors are also adjustable using a tiny screw on the top of them. By adjusting the Variable Resistor the worker can control how much energy can flow through the DS3800NDAD1H1C at any time. The DS3800NDAD1H1C has nine small circular transistors. The transistors are used to amplify or change electrical signals and electrical power.
Call AX Control today for more information or a price quote.
