DS3800NDCA

About the DS3800NDCA

The DS3800NDCA is a circuit board made by General Electric for their Mark IV Speedtronic line. The DS3800NDCA has a large female terminal. The DS3800NDCA has thirty-five resistors with different banding colors. The DS3800NDCA also has eight light emitting diodes or LEDs. These diodes light up as an electrical current flows through them. Five LEDs are yellow while the other three LEDs are red. The DS3800NDCA has ten Potentiometers or Variable Resistors in one corner and another five Potentiometers or Variable resistors on the opposite edge. The Variable Resistors are all adjustable by a tiny knob on the top of each resistor. The Variable Resistors do not rely on one another they can all be adjusted separately. The DS3800NDCA has two thin metal dividers along the long edges of the board (one on either side). The DS3800NDCA also features forty-seven short towers each with a flat head screw on top. These towers allow for other components such as diodes, capacitors, resistors, LEDs etc. to be attached as needed. The DS3800NDCA also has two grey clips on a short edge and two screw holes on the opposite short edge. These pieces are used to secure the DS3800NDCA in place. The DS3800NDCA can be secured on its own or to another circuit board depending on how your current system is set up. One long edge of the board is labeled A through J (skipping the letter I). The other long edge has the part number (DS3800NDCA) printed along it.

Call AX Control for a quote.