DS3800NDCA1A1A

About the DS3800NDCA1A1A

The DS3800NDCA1A1A is part of the Speedtronic Mark IV line created by General Electric. The DS3800NDCA1A1A also features over forty-five little columns each with a flat screw on top. These towers enable other mechanisms such as resistors, LEDs, diodes, capacitors, etc. to be connected as desired. The DS3800NDCA1A1A has two slender silver barriers along the longest edges of the board (one on either side). The elongated edges have labels on them. The DS3800NDCA1A1A has the part number on one edge and the letters A-J on the other. The DS3800NDCA1A1A also has two hooks on a shorter edge and two holes on the opposite shorter edge. These areas are to attach the DS3800NDCA1A1A in place. The DS3800NDCA1A1A can be attached to a larger circuit board or on its own depending on how your current system is assembled. The DS3800NDCA1A1A has a large female port. The DS3800NDCA1A1A has over thirty resistors. Each resistor has a unique set of strips. The DS3800NDCA1A1A also has eight light emitting diodes (LED). Three LEDs are ruby colored, while the other five LEDs are amber colored. These diodes light up as electricity runs through them. The DS3800NDCA1A1A has fifteen Variable Resistors or Potentiometers. Ten are in an upper corner and another five Variable Resistors or Potentiometers on the shorter edge. The Variable Resistors are all adjustable using a small control on the top or side of each resistor. The Variable Resistors do not depend on one another, they can all be adjusted on their own.

Call AX Control for a quote.