DS3800NDCA1E1F

About the DS3800NDCA1E1F

The DS3800NDCA1E1F is part of the Mark IV Speedtronic line created by General Electric. The DS3800NDCA1E1F is a daughter board and can be attached to a larger circuit board known as a motherboard. The DS3800NDCA1E1F also has two hangers on a shorter edge and two holes on the opposing shorter edge. These areas are to connect the DS3800NDCA1E1F in place. The DS3800NDCA1E1F also has over forty-five little columns each with a flat screw on top. These towers enable other instruments such as LEDs, diodes, capacitors, resistors, etc. to be linked as needed. The DS3800NDCA1E1F has two slim grey barricades along the longest sides of the circuit board (one on either side). The longer edges are labeled. The DS3800NDCA1E1F has the part number on one edge and the letters A-J on the other. The DS3800NDCA1E1F has a large female port. The DS3800NDCA1E1F has over thirty resistors. Each resistor has a unique set of strips. The DS3800NDCA1E1F also has eight light emitting diodes (LED). Three LEDs are ruby colored, while the other five LEDs are amber colored. These diodes light up as electricity runs through them. The DS3800NDCA1E1F has fifteen Variable Resistors or Potentiometers. Ten are in an upper corner and another five Variable Resistors or Potentiometers on the shorter edge. The Variable Resistors are all adjustable using a small control on the top or side of each resistor. The Variable Resistors do not depend on one another, they can all be adjusted on their own.

Call AX Control for a quote.