DS3800NEPD1F1B

About the DS3800NEPD1F1B

The GE Excitation Power Board DS3800NEPD1F1B features a hole in each corner through which you can insert a screw to secure the board. The board is populated with multiple capacitors. The board is populated with 2 Analog Devices power components. The GE Excitation Power Board DS3800NEPD1F1B is also populated with 1 amber indicator LED. The board also has 1 34-pin connector and multiple wire terminals for attaching wires and components to circuits. The board is also populated with 5 trimmer resistors.

The GE Excitation Power Board DS3800NEPD1F1B is popluated with 2 jumpers. They are located near the Analog Devices power components. The jumpers provide 1 method for the installer to configure the board to work with the other component in the drive. The combination of boards and moving parts is unique to the drive and to make the board work with the existing components, the jumpers can help configure the board for the specific purpose.

The description of the jumpers and the configuration options available with the different jumper positions is provided in the board configuration guide. The jumper have IDs printed on the board. The jumper IDs are prefixed with RJ. The remainder of the ID is a numerical value. For example, some jumper IDs are RJ4 and RJ5. To move a jumper, use your thumb and forefinger to slide the jumper off the pins., Then slide the jumper  over the pins you want to cover. Do not force the jumper to slide over the pins. The pins might bend or break off if too much pressure is applied.