DS3800NEPD1F1C

About the DS3800NEPD1F1C

The GE Excitation Power Board DS3800NEPD1F1C features a hole in each corner through which you can insert a screw to secure the board. The board is populated with multiple capacitors. The board is populated with 2 Analog Devices power components. The GE Excitation Power Board DS3800NEPD1F1C is also populated with 1 amber indicator LED. The board also has 1 34-pin connector and multiple wire terminals for attaching wires and components to circuits. The board is also populated with 5 trimmer resistors.

The GE Excitation Power Board DS3800NEPD1F1C is populated with multiple single-pin cable connectors. The connectors have IDs printed adjacent to the connector. The IDs are prefixed with DD. The prefix is followed by a number. Some of the IDs are DD6, DD7, DD11, and DD12. A cable slides into the connector. The cable is equipped with a metal pin. When you install the board, you might it easier to first connect the single-pin cables before you install the board.

The board is secured to the drive interior with screws attached to the 4 corners. When you install the board, make sure the screws are not lost in the interior of the drive. A lost screw might cause a short circuit which can lead to a fire or damage components. A lost screw can easily be jammed in the moving parts or the motor. To prevent any problems,  use 2 hands when you install or remove screws. Use one hand to hold the screws and the other hand to turn the screwdriver.