DS3800NFEE1G1H

About the DS3800NFEE1G1H

The DS3800NFEE1G1H was created by GE. This product is what is known as an analog interface printed circuit board. The DS3800NFEE1G1H is a component of the Speedtronic Mark IV series which was developed to control turbines.

The DS3800NFEE1G1H prominently features a cube-shaped black transformer which is identified by its part number 218A4499-P2. Situated on one side of the DS3800NFEE1G1H is a small connector port. Using this port, extra components or additional boards can be connected to the DS3800NFEE1G1H. Included around the DS3800NFEE1G1H are at least ten round silver transistors. Placed near the top left corner of the DS3800NFEE1G1H are three blue potentiometers. The resistance of each of the potentiometers, or variable resistors, can be adjusted with the dials on each device. Near the lower left corner of the DS3800NFEE1G1H is one relay. The DS3800NFEE1G1H features many capacitors in a variety of sizes and colors. Near the top part of the DS3800NFEE1G1H are two yellow capacitors. Placed around the board are several yellow capacitors. In the lower left corner of the DS3800NFEE1G1H is an orange capacitor. Also found on the DS3800NFEE1G1H are a few silver capacitors. Close to the middle of this printed board are two rectangular pink capacitors. A red light-emitting diode, also known as an LED, is situated on the right edge of the DS3800NFEE1G1H. A series of test points is found very close to the LED. Operators can make sure that the DS3800NFEE1G1H is functioning correctly with these test points. Taking up a lot of the DS3800NFEE1G1H are over 100 resistors which are various different sizes and colors.