DS3800NLCA1E1E

About the DS3800NLCA1E1E

The DS3800NLCA1E1E is showcased in the Mark IV (Speedtronic) series by GE. Each piece is categorized with a letter and a number to specify the part and which number it is on the board. Every piece is outlined to indicate where something should go and how big it is.  The DS3800NLCA1E1E has six ginger capacitors and four long dark capacitors. The capacitors are used to store energy in an electric field. The DS3800NLCA1E1E has over sixty resistors that restrict energy flow around the board. The DS3800NLCA1E1E has two masculine ports and a feminine port to connect with additional circuit boards. To lock the DS3800NLCA1E1E in place, there are a few areas to place screws and two plastic fasteners to snap the DS3800NLCA1E1E into place. The DS3800NLCA1E1E has three small black transistors that are used to enhance or change electrical power or electronic signals. The DS3800NLCA1E1E has two large grey diodes, two small grey diodes, thirteen small deep burgundy diodes, four light blue diodes, twelve large deep burgundy diodes, six large dark diodes. Diodes allow energy to only follow in a single direction. The DS3800NLCA1E1E also has a single yellow LED. An LED will light up as the energy current passes through it. The DS3800NLCA1E1E has a combination of twenty-eight integrated circuits. The integrated circuits are split into two classes the EEPROM and the EPROM. The EPROM is pre-programmed integrated circuits but is capable of being revised as needed. The EEPROM is pre-programmed integrated circuits as well however, they cannot be changed. Both of these integrated circuits hold the information that is used for the DS3800NLCA1E1E to work correctly.

Call AX Control’s knowledgeable staff for more information or if you are looking for a price quote.