DS3800NPCE1A1B

About the DS3800NPCE1A1B

General Electric created the DS3800NPCE1A1B as a component of the Speedtronic MKIV or Mark IV. Mark IV is a system in the Mark series which was developed for turbine management. The Mark systems have been in use since the late 1960s. The technologies used for Mark processes were originally developed in the 1940s. The Mark systems have been relied on consistently for decades. This series automates turbine processes and protects the turbines from potential damage. The DS3800NPCE1A1B is what is known as a power converter filter. This product is a PCB or printed circuit board.

The DS3800NPCE1A1B features various electronic circuit board components. The most prominent components on this board are a series of resistors. There are fourteen (14) resistors on the DS3800NPCE1A1B. These resistors are large and they are black in color. Each resistor is connected to the surface of the board with wires. These resistors are mounted up off of the circuit board which white plastic mounts. A number of jumper pins are also featured on the DS3800NPCE1A1B. These jumper pins are silver and made of a metal material. There are at least five (5) jumper pins on the DS3800NPCE1A1B. Jumpers can be used to connect jumper pins. This would alter the settings of the circuit board. The DS3800NPCE1A1B has holes at each corner of the circuit board. These holes are used to screw the DS3800NPCE1A1B into place where it is needed.

Like all products, AX Control will ship the DS3800NPCE1A1B packaged in a static bag. This static bag will get rid of any and all static energy before the item is handled by the operator.