DS3800NPPB1L1H

Product Description

General Electric created the DS3800NPPB1L1H to be a part of the Speedtronic Mark IV. Mark IV is a system designed to automate turbines while protecting those turbines from dangerous operating conditions. The DS3800NPPB1L1H is a power supply circuit board.

The DS3800NPPB1L1H prominently features four (4) inductors or coils. Three (3) large green capacitors can be found in a line near the bottom of the DS3800NPPB1L1H. Two (2) large metal transistors can also be seen on the top half of the DS3800NPPB1L1H. Eight smaller transistors are situated on the surface of the DS3800NPPB1L1H. Three of these transistors are grouped together near the upper center part of the circuit board.  The other five transistors can be found at the bottom right corner of the DS3800NPPB1L1H. Two (2) large brown capacitors are located on the upper right side of the DS3800NPPB1L1H. Four (4) blue potentiometers are positioned on the DS3800NPPB1L1H. Three of these components are near the bottom right corner of the DS3800NPPB1L1H and one is located on the opposite side of the board. One (1) small blue connector port is located on the left side of the DS3800NPPB1L1H. This connector is a male connector port with twenty-six (26) pins. Four blue potentiometers can be found on the surface of the DS3800NPPB1L1H. Three of these potentiometers are located near the bottom right corner of the circuit board. The last potentiometer is located on the edge of the DS3800NPPB1L1H. Five integrated circuits are attached to the DS3800NPPB1L1H. A red switch can be found on the left side of theDS3800NPPB1L1H. This device can be switched between “disable” and “enable”.