DS3800NPRB1A1A

About the DS3800NPRB1A1A

The DS3800NPRB1A1A is a component which is a printed circuit board. This board was created as a part of the Speedtronic Mark IV series of turbine control. The DS3800NPRB1A1A is a proximitor interface circuit board. This device was manufactured by General Electric (GE).

Prominently featured near the lower left corner of the DS3800NPRB1A1A is a converter. This converter is black and shaped like a cube. The converter is marked with the component's voltage, which is 12VDC or 12 volts DC. Situated next to the converter there is a long connector port which is black on the left edge of the DS3800NPRB1A1A. A blue male pin connector port which is smaller in size is positioned on the opposite edge of the DS3800NPRB1A1A. This blue port is located in the center of a series of ten (10) test points. Each of these test points is marked with the initials TP, as TP0 to TP9. Scattered all around the DS3800NPRB1A1A are twenty-seven (27) integrated circuits. Located in between the integrated circuits are a number of capacitors in a variety of sizes. The round capacitors are in different colors like yellow and white. There are also several pink capacitors which are shaped like rectangles. The DS3800NPRB1A1A features over one-hundred (100) resistors. Many of the resistors are banded in various colors such as yellow, blue and red. Some of the resistors are solid colored in blue and grey. Several small diodes are placed on the circuit board in black and grey. The DS3800NPRB1A1A is labeled along the upper edge of the board with the letters A to J.