DS3800NPSE1C1B

About the DS3800NPSE1C1B

The DS3800NPSE1C1B is a power supply printed circuit board. This device was produced by GE (General Electric). The DS3800NPSE1C1B was made for the Speedtronic Mark IV series which automates the operation of turbines.

Thirty-six (36) medium capacitors are featured on the DS3800NPSE1C1B. These capacitors are black and are organized in rows on the circuit board. Nine (9) of the capacitors are organized in a horizontal row near the top of the DS3800NPSE1C1B. The other capacitors are organized in vertical rows. Three of the rows contain eight capacitors each and the last row contains three capacitors. Three (3) black connector ports are attached to the DS3800NPSE1C1B. Two of these ports can be found near the left edge of the DS3800NPSE1C1B. The third connector port is small is aligned with the top edge of the board. Also located along the top edge are three (3) blue potentiometers. Each potentiometer contains a dial which allows the operator to adjust the resistance of each component. For this reason, potentiometers may also be called variable resistors. Six (6) fuses are placed on the DS3800NPSE1C1B in various areas. Two of the fuses are paired together near the bottom left corner of the circuit board. Another pair of fuses can be found near the other two. One fuse is placed near the center of the DS3800NPSE1C1B and the last is attached to the top edge of the board’s top edge. Several small resistors, diodes, and capacitors are located throughout the board. One orange LED (light-emitting diode) is also located on the DS3800NPSE1C1B.