DS3800NPSY1H1F

About the DS3800NPSY1H1F

The DS3800NPSY1H1F is a device which was made by GE (General Electric). This product was designed to be a component of the Mark IV series which is used for turbine automation. The DS3800NPSY1H1F is a PCB (printed circuit board).

On the right of the DS3800NPSY1H1F there are six capacitors which are silver. The large capacitors are sitting upright on the circuit board. There are also four (4) large transistors which are silver situated on the DS3800NPSY1H1F. Two of these transistors are mounted on a metal plate and connected to the DS3800NPSY1H1F by grey wire. The two remaining transistors are located on the opposite side of the printed circuit board. These two transistors are also mounted on small plates. On the left side of the DS3800NPSY1H1F there are five (5) much smaller transistors. Each of these transistors is designated with the letter Q. Placed on the top of the DS3800NPSY1H1F there are two (2) inductors, also known as coils. These two inductors are marked with their part name which is 448373823-001 8709. The inductors are attached to the circuit board which red wire. Placed to the left of the DS3800NPSY1H1F there is a blue connector port. This connector port is a 40 point “male” port. This connector port is placed vertically on the DS3800NPSY1H1F. Also located on the circuit board is a large metal diode. The diode is attached to the circuit board with wire. Positioned in the center of the DS3800NPSY1H1F are five (5) integrated circuits. Four blue potentiometers are centered on the DS3800NPSY1H1F circuit board.