DS3800XPEN1B1C

About the DS3800XPEN1B1C

DS3800XPEN1B1C General Electric Speedtronic Circuit Board

The DS3800XPEN1B1C is a Speedtronic Mark IV board component manufactured by GE.  

The DS3800XPEN1B1C is designed with a metal underlayment that is the same size as the board.  The DS3800XPEN1B1C is connected to this underlayment via two screws mounted through two factory drilled holes.  This is a small board with only a few components.  Each component is marked with a reference designator.  Other markings on the board are used to identify the board itself (board ID number) or to give users identifying codes like 6BA07.  There are also a few alignment markings.  

Board components on the DS3800XPEN1B1C include connectors like a six-pin header connector (vertical) next to a ten-pin vertical cable connector.  The board also has a line of seventeen pins located near the center of the board.  These are placed between two metal poles and do not have any other type of designator.   Additionally, the board has three stab-on connectors, a TP test point, and a twelve-position terminal strip that is labeled and numbered at each screw connection. 

Other board components include two jumper switches, five ceramic capacitors, a disk capacitor, and two axially mounted electrolytic capacitors.   The board has twenty resistors of varying resistance. 

For additional details about the board, its use, and for important information regarding proper handling and installation,  please refer to technical support publications originally provided to users by General Electric.  This includes manuals and user guides. 

AX Control offers an automatic warranty with every Mark IV component purchased from our warehouse.   Ask our team for more details, or follow the link located on this page.