DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
The DS3810EEPB is an upgraded DS3800 board component from General Electric. This printed circuit board (PCB) is designed for use within the Speedtronic management system from GE designated as the Mark IV. While Speedtronic systems have been used for controlling and managing industrial turbine systems since the late 1960s, the MKIV was the first to offer triple modular redundant architecture. It has integrated microprocessors working together to protect turbine systems from Overspeed, loss of flame, vibration, etc.
The DS3810EEPB is designed as a Universal Memory board. The board is marked along one edge to help with alignment. Factory-made mounting holes are located in each board corner, with two of these filled by inserted nylon extractor clips. These clips keep the board in place after installation but also help technicians pull the board from its installed position during maintenance or replacement.
The DS3810EEPB has a single toggle switch along one edge. Next to this is a red LED indicator. Other board components include multiple resistor network arrays, a backplane connector, and integrated circuits. In addition, the board has four small auxiliary boards mounted near its center. The boards connect to the primary unit using board-to-board pins. Each of these boards corresponds to jumper switches located along the edge of each auxiliary board. To ensure continuous service, make sure jumpers on your replacement board match those of the board you are replacing.
AX Control maintains a large inventory of products in our large warehouse located in central North Carolina. Let us know what we can help you with today.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $457 |
Our highly skilled technicians can repair your DS3810EEPB. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved