DS3820AISA

About the DS3820AISA

The DS3820AISA is part of the Speedtronic Mark IV line manufactured by General Electric. The DS3820AISA is a smaller circuit board. The DS3820AISA has six small blue male terminal ports with ten metal prongs in each port. The DS3820AISA sixteen large bright orange diodes, and eight small teal diodes. Didoes are used to direct energy to flow in a single direction. The DS3820AISA has four light blue resistors with up to five colored rings to indicate how much energy was resistor can restrict at any time. The DS3820AISA has four sets of pins called Jumper Ports. Jumper Ports come with small plastic sleeves to cover the pins. By covering the Jumper Ports the worker can control and direct which way the energy flows through the circuit board. The DS3820AISA has a black plastic terminal with twelve flat screw ports. In front of the black plastic, the terminal is a small metal terminal with another twelve flat screw ports. The DS3820AISA also has a small section in the open space of the circuit board where additional parts could be added like an EPROM, EEPROM, additional diodes, capacitors, resistors, etc. There are three thin metal pieces with screw ports to secure the DS3820AISA in place. Each section of the DS3820AISA is labeled with a corresponding letter and number combination based on the part.

** AX Control suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3820AISA was initially provided by General Electric.

For additional information call AX Control’s trusted staff.