DS3820RDMA1A1A

About the DS3820RDMA1A1A

** AX Control suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3820RDMA1A1A was initially provided by General Electric.

The DS3820RDMA1A1A is featured in the Mark IV Speedtronic line from General Electric. The gas and steam turbines are a fast way to provide energy and flexible fuel. A gas turbine builds pressure by using a combination of air and fuel in an internal combustion engine to create a mixture of gases to turn the turbine blades. A steam turbine uses a large boiler which is filled with water. The boiler is then heated to create large amounts of steam which then turns the turbine's blades. The energy produced by the spinning turbine blades is then harnessed for other purposes. The edge of the DS3820RDMA1A1A is labeled A, B, C, D, E, F, G, and H. The DS3820RDMA1A1A has four holes (one in each corner) to secure the circuit board in place. The DS3820RDMA1A1A has a large red case that takes up most of the circuit board. This red shell is used to hold up to four other circuit boards. The top of this shell is labeled A, B, C, D. The bottom of the shell is labeled HRDB underneath each slot.  Each component of the DS3820RDMA1A1A is labeled with a number and a letter. The DS3820RDMA1A1A is a circuit board the has twelve blue male terminal ports. These male terminal ports allow the DS3820RDMA1A1A to be connected to surrounding circuit boards.

If you’d like an additional information on the DS3820RDMA1A1A please call AX Control’s professional staff.