DS3820STBB1A1A

About the DS3820STBB1A1A

The DS3820STBB1A1A is a circuit board created by General Electric for the Speedtronic Mark IV Turbine series. A gas or steam turbine uses a large internal combustion engine to mix fuel and air to cause a contained explosion. This explosion creates a series of gases that are under a lot of pressure and force their way out of the engine causing the turbine to move at high speed generating a great deal of energy. The energy created by the moving turbine is then harnessed and used for a multitude of other purposes.

The DS3820STBB1A1A has three small male terminal ports that have blue plastic cases around them. Each of the male terminal ports has roughly twenty metal prongs inside. These male terminal ports allow the DS3820STBB1A1A to be connected to surrounding circuit boards. The DS3820STBB1A1A has two thing metal edges with holes and notches to secure the DS3820STBB1A1A into place. The DS3820STBB1A1A has three large black boxes that are screwed onto the DS3820STBB1A1A. In between the black boxes are two long silver metal arches. Along both of these metal arches, there are twelve flat head screws. The DS3820STBB1A1A has a large series of diodes and resistors along the bottom. The diodes control the direction of the energy flow. The resistors restrict the energy flow through them.   

If you would like any additional information about this product or any other that AX Control offers please call the trusted team at AX Control. They will be happy to assist you with any questions.

** AX Control suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3820STBB1A1A was initially provided by General Electric.