About the DS200ADPAG1A
While certainly important to describe the functionality of various retention latches so crucial to the normal functionality of this DS200ADPAG1A Genius Adapter Board, the following description of this process in such great detail is more likely than not a testament to the relative rarity of this DS200ADPAG1A Genius Adapter Board online, and by extension, the rarity of its related instructional manual materials. With this in mind, much of the product-specific hardware information on this page will be sourced from a thorough, technician-led visual inspection of the product, paired with any information collectible from the functional DS200ADPAG1A product number itself.
Hardware Tips and Suggestions
The GE Genius Adapter Board DS200ADPAG1A features one 40-pin connector and one 26-pin connector. It also has one 3-pin connector and one 10-pin connector. The cables that connect to the 40-pin connector and the 26-pin connector are held in place with retention latches that are built into the connectors. However, the latches require some special considerations before you use them during the procedure to replace the board. The retention latches must be fully engaged to keep the cables from disconnecting from the connectors on the board. To use the retention latches, use your fingers to slip the latches away from the cable. Then, grasp the cable at the connector end and gently remove it from the board. To install a cable first move the latches out of the way before you insert the cable into the connector.
Some of the other important hardware components exclusively available to owners of the General Electric Mark V Series DS200ADPAG1A Genius Adapter Board include:
- A distinctive, L-shaped base circuit board
- Several factory-printed labels, including the DS200ADPAG1A product number
- Two large, blue female ports, each with different pin counts
- Several notches cut into the side of the base circuit board for installation purposes.
These are only some of the visible hardware elements available to users of this DS200ADPAG1A Genius Adapter Board. Upon a service technician-guided breakdown of the DS200ADPAG1A functional product number, more information about this Mark V Series product will be revealed, including its normal assembly type, ADPA functional acronym, normal PCB coating, group one Mark V Series grouping, and singular, A-rated functional product revision.
