DS200DCFBG1BNC

About the DS200DCFBG1BNC

The DS200DCFBG1BNC is a power supply board manufactured for General Electric’s Mark V series of replacement and optional boards. The DS200DCFBG1BNC circuit board is part of the Speedtronic Mark V control system, which has specific applications in the control and management systems of wind, steam, and gas turbine automated drive assemblies. System control level power, as well as the enclosure fan, is provided electricity by this card. Compatible with a number of GE brand exciters and drives, this card can be installed in a variety of systems. Drives from the FC2000, AC2000, DC2000, ME2000, and CB2000 series can use this board. This DS200DCFBG1BNC printed circuit board's greater Mark V Series, while possessing specific applications in relatively more recently-developed alternative energy assemblies, has to be considered a now-obsolete legacy product series, as its production was discontinued due to obsolescence in the many years following its initial product series release. With this being true, this DS200DCFBG1BNC Power Supply Board's greater Mark V Series is still quite the highly-esteemed General Electric product series, as it exists as one of the final GE Mark product series to incorporate the patented Speedtronic control system technology across a wide range of its offerings. This DS200DCFBG1BNC printed circuit board, while definable as a Power Supply Board in its own right, is not the originally-developed product of this specific Mark V Series functionality; that would be the DS200DCFBG1 parent Power Supply Board missing this DS200DCFBG1BNC PCB's three total significant product revisions.

Hardware Tips and Specifications

As with any product offered alongside General Electric's Mark V Turbine Control System Series; this DS200DCFBG1BNC printed circuit board is a product offering unique in a number of hardware component inclusions and specifications. Voltages fed to the board can safely rate from 38 to 115 VAC. DS200DCFBG1BNC includes five circuits around the board. These include a driver circuit, the control level supply circuit, a motor field power circuit, and both an AC and a DC monitoring circuit. To ensure the circuits are not disrupted, three of the fuses on board are protected. Should any fuses need attention, the integrated LED and neon indicators will alert the user. Monitoring voltage levels is important and can be done using one of the five test points on the card. User-led configuration is possible using the twelve jumpers and seven DIP switches. The voltage protection and suppression strategy unique to this DS200DCFBG1BNC Mark V Series product offering is introduced primarily with this DCFB-abbreviated board's introduction of a series of hardware components standardized to its greater Mark V Series; including but not limited to various styles of capacitors, transistors, resistors, diodes, and integrated circuits. The five test point crucial to the assembly of this DS200DCFBG1BNC product include:

• The P5 Regulated Power Supply Test Point
• The DCOM Test Signals Common Reference Test Point
• The P15 Positive Power Supply Test Point
• The N15 Negative Power Supply Test Point
• The ACCT ACCT Signal DCFB/SDCC Test Point

All of these aforementioned test points in the assembly of this DS200DCFBG1BNC product offering have been named through an amalgamation of their factory-printed nomenclature labels and functionality in terms of the DS200DCFBG1BNC PCB and its greater Mark V Series automated drive assembly. Twelve total configurable jumpers are available to the DS200DCFBG1BNC printed circuit board for customization purposes, although this DS200DCFBG1BNC Power Supply Board makes use of thirteen, given its elevated revision history allowing for the inclusion of the JP13 Scaling Select for Shunt Jumper in its internal assembly. The positions, factory-printed nomenclature labelings, and specific DS200DCFBG1BNC board-specific applications for each jumper in this product offering's assembly are described in detail in the DS200DCFBG1BNC Jumper Settings datasheet attached above. If a jumper labeled JP13 or JP14 exists within the assembly of this DS200DCFBG1BNC product offering, it is safe to assume they exist as harmless, functionality-dodging vestigial structures, as both of these jumpers are described in the DS200DCFBG1BNC PCB's originally-introduced manual materials as deleted jumper styles. Installation parameters provided with the board and the drive should be met. Following these will ensure that the DS200DCFBG1BNC, as well as the drive, will operate as intended. An illustrated guide to wiring and installing the board is available in the device’s manual and datasheet. Our experienced and trusted sales team at AX Control is happy to help with all of your DS200DCFBG1BNC needs. Prices and availabilities on all parts and repairs are available by contacting our office by phone or email.