Product Description
The DS200DCPAG1A functions as a Digital Control Processor Card manufactured by General Electric for the Mark V series. The Mark V Turbine Control System Series that this DS200DCPAG1A product offering was originally manufactured for has specific applications in the control and management systems of compatible wind, steam, and gas turbine automated drive assemblies, and exists as a now-obsolete legacy General Electric product series given its manufacturing discontinuation that took place in the many years since its initial release. While this DS200DCPAG1A PCB's greater Mark V Turbine Control System Series is no longer in active production, it is still somewhat well-updated as it is one of the final General Electric Mark product series to make use of the patented Speedtronic control system technology. The Speedtronic control system technology seen in this DS200DCPAG1A Digital Control processor Card and other Mark V Series components was first seen alongside the release of the Mark I Series in the late 1960s. Before making any ultimate purchase decision on this DS200DCPAG1A product offering, it is crucial to consider that its originally-introduced performance specifications and basic dimensions have no doubt been altered by its possession of a standard A-rated functional product revision.
Hardware Tips and Specifications
The assembly of this DS200DCPAG1A PCB carries multiple reference designators for quick identification of components, codes like C-ESS and 6BA02, and the GE imprint. The board is marked along two edges to allow for alignment within the rack of a Mark V system. Each specific hardware component in the assembly of this DS200DCPAG1A Mark V Turbine Control System Series product contributes to its greater intended Mark V Series functionality, as described above. Given this DS200DCPAG1A printed circuit board's attribution to a now-defunct General Electric legacy product series, it should come as no true surprise that is original instructional manual materials are largely unavailable online for the research purposes of this personalized product page. With this being true, the DS200DCPAG1A functional product number itself can be considered a primary source of DS200DCPAG1A Board hardware information, coding for different DS200DCPAG1A Board specifications in functional naming chunks. For instance, the DS200DCPAG1A functional product number begins with the DS200 series tag delegating this DS200DCPAG1A PCB's normal Mark V Series assembly and its domestic original manufacture location. Some of the other hardware details revealed by the DS200DCPAG1A functional product number include this DS200DCPAG1A PCB's:
- DCPA functional product abbreviation
- Normal PCB coating style
- Group one Mark V Series product grouping
- A-rated functional product revision
When operating the DS200DCPAG1A within the Mark V system, caution must be taken when installing the model or removing it from the system, as all of the components on the device can be easily damaged. If the model's features are easily damaged, it can cause functional and operational issues and must be replaced or repaired immediately. The DS200DCPAG1A is heavily populated with components like vertical pin cable connectors (3), integrated circuits (17), and resistor network arrays (24). The board also has capacitors, transistors, diodes, and resistors; these components are introduced the majority of Mark V Series internal assembles with voltage protections in mind. Resistors tend to be made from metal film. Capacitors range from small ceramic to larger axial capacitors made from polyester vinyl and electrolytic material. The DS200DCPAG1A model is also equipped with a ZENER diode, an indicator, plug connectors, and more. All of the information mentioned above on the DCPA model are taken from visual inspection. For more information on how this model can operate within the Mark V series, it would be best to contact General Electric directly.
