About the DS200DENQF1BDE
The DS200DENQF1BDE is a GE replacement/renewal part designed to be used on boards within the Mark V series. The Mark V Turbine Control System Series system for gas and steam turbine control was one of the later Speedtronic systems, with the patented Speedtronic control system technology that it features first being seen alongside the rollout of the previous Mark I Series in the mid to later 1960s. It included such features as built-in diagnostics, available online maintenance, a direct sensor interface, and a TMR (triple modular redundant) architecture that could be configured as Simplex for less complicated systems. With this being true, the Mark V Turbine Control System Series must still be considered obsolete overall, as it exists as a legacy General Electric Mark product series discontinued for manufacture due to a manufacturer-identified functional series obsolescence in one of the many years following its initial release.
Hardware Tips and Specifications
The DS200DENQF1BDE is a replaceable EPROM device. EPROMs are erasable programmable read-only memory chips designed to retain data when power is switched off. These chips are typically used in boards like the SLCC LAN Communication card to hold LAN control processor software at U6 and U7. These chips cannot be configured in the field but are replaceable and can be moved from one board to another. Generally, this DS200DENQF1BDE printed circuit board product offering's voltage suppression and limitation strategy involves the placement of numerous Mark V Series-standardized voltage-limiting hardware components into its normal Mark V Series internal assembly. This DS200DENQF1BDE printed circuit board or PCB for short is not the original product designed and produced for its specific Mark V Series functional role; that would have to be the DS200DENQF1 parent Software PROM Set missing this DS200DENQF1BDE PCB's three-fold revision table entirely. This DS200DENQF1BDE PCB edits the original DS200DENQF1 Software PROM Set through its attachment of two functional product revisions and a singular artwork configuration revision rated at grades of B, D, and E, respectively.
For additional details about the DS200DENQF1BDE, please refer to data sheets, user guides or product manuals that were sent with your original purchase from General Electric. AX Control maintains on-hand products ready to ship from our North Carolina warehouse from GE, Reliance, Eurotherm, Parker, and many other manufacturers. In-stock products will ship same-day if ordered prior to 3 pm. Let us know what we can help you with today. Given this DS200DENQF1BDE printed circuit board product offering's above-stated now-obsolete legacy product series attribution, it is not surrounded by any pertinent original instructional manual materials online. With this being the case, the DS200DENQF1BDE functional product number itself can be considered a primary source of DS200DENQF1BDE Board hardware component and component specification information, as it codes for specific DS200DENQF1BDE informational nuggets in a series of consecutive functional naming elements. Case in point, the DS200DENQF1BDE functional product number actually starts off with a dual-functional segment in the DS200 series tag dictating this DS200DENQF1BDE PCB's normal Mark V Series assembly as well as its domestic location of original GE manufacture. Some of the other relevant hardware details embedded in the DS200DENQF1BDE functional product number includes this DS200DENQF1BDE PCB's:
- DENQ functional product acronym
- F-style protective PROM Module enclosure
- Group one Mark V Series product grouping
- Three-fold revision table
