About the DS200DMCAG1AAA
The DS200DMCAG1AAA is the main control card designed for Mark V systems running IOS Version 2.0 for DOS. If you are running a Lynx OS, please refer to our listings for DS200DMCB boards instead of DMCA. We have several DMCA boards listed on our site, so please be sure to order the correct board for your particular needs. The DS200DMCAG1AAA works in conjunction with several other boards, including the KLDA or DKLA Keypad/display cards and the DPCA power connect card. The DS200DMCAG1AAA is part of the Mark V system designed by General Electric, which offers on-line repair, synchronizing check protection, digital valve positioning, and full turbine-generator monitoring. This DS200DMCAG1AAA Gen/Log/Key Interface Board is not actually the original PCB product manufactured for General Electric's Mark V Turbine Control System Series; that would be the DS200DMCAG1 parent printed circuit board missing this DS200DMCAG1AAA PCB's three A-rated revisions.
Hardware Tips and Specifications
This DS200DMCAG1AAA Gen/Log/Key Interface board is a specialized Mark V Series product offering, and as such, necessitates several specialized and unique hardware components and component specifications in its internal assembly. The DS200DMCAG1AAA weighs approximately 1.73 pounds. While it has been discontinued by the OEM, it can typically be found in our inventory, ready to ship.The DS200DMCAG1AAA includes multiple components on its surface including a single large heat sink and a smaller heat sink, inductor coils, transistors, integrated circuits, resistor network arrays, pin connectors, and plug connectors. A few components are surface wired to the base circuit board of this DS200DMCAG1AAA PCB and should be handled with care to ensure the wiring is not disturbed. The board is marked and factory drilled at the corners for mounting, with each factory-drilled hole being insulated in observance of this Mark V Series device's static sensitivity.
The DS200DMCAG1AAA functional product number is a strong source of hardware component and component specification information for the DS200DMCAG1AAA Gen/Log/Key Interface Board, beginning with the DS200 series tag. This series tag has dual naming functionality for this DS200DMCAG1AAA Mark V Series printed circuit board; detailing it both as a domestically-manufactured General Electric product and as a normal assembly version of Mark V Series printed circuit board. This DS200 series tag is shrugged in the DS200DMCAG1AAA product number for an instance of the DMCA functional acronym, which itself is followed by the G1 series grouping tag, which also has dual naming functionalities for this PCB. The G1 series grouping tag here presents the DS200DMCAG1AAA PCB as a normally-coated printed circuit board that belongs to the first grouping of Mark V Series products. The three trailing letter A's at the end of the DS200DMCAG1AAA product number are insights into this DS200DMCAG1AAA PCB's full revision history.
