About the DS200GDPAG1AHE
The DS200GDPAG1AHE is a high frequency power supply board. General Electric developed this card for its optional and replacement board series, Mark V. A wide range of GE brand exciters and drives can have this board installed in its cabinet, although specifically this PCB is best-attributable to the Mark V Series, especially given the General Electric alphanumeric product number and functional abbreviation that it possesses. This DS200GDPAG1AHE High Frequency Power Supply board is not the original model of printed circuit board offered by General Electric for their Mark V Series; that would be the DS200GDPAG1 parent High Frequency Power Supply Board, which is missing this DS200GDPAG1AHE printed circuit board's two functional product revisions and singular artwork configuration revision.
Hardware Tips and Specifications
Features found on the board ensure that an exceptional user experience is provided during normative use, and that this DS200GDPAG1AHE printed circuit board achieves its designated functionality as a High Frequency Power Supply Board. The DS200GDPAG1AHE includes a control power supply, a 120 VDC power supply, and a 50 VAC output transformer. Two main circuitries, including a control signal level and protective circuits, are found on this Mark V Series product offering, as well as a 27 kHz inverter, a regulator, an input rectifier, and an input filter. The DS200GDPAG1AHE High Frequency Power Supply card is protected from voltage spikes and interruptions, as all inputs integrated on the board are isolated. Users are provided with board status diagnostics via the four LED indicators and two neon-style diagnostic indicators. Installation parameters are provided for both the power supply board and the drive itself in original General Electric Mark V Series instructional manual materials. Meeting these guidelines will ensure that the entire drive system operates properly. A guide to wiring the DS200GDPAG1AHE board into the drive is available in the device manual and datasheet. Both AC and DC power supplies can be fed to this 700 W board. DC sourced inputs to the board can range from 105 to 140 VDC, while AC sourced inputs can rate from 80 to 132 VAC of standard voltage. The three significant product revisions mentioned before may play a large hand in increasing the overall performance specifications, and likely the general dimensions, of this General Electric Mark V Turbine Control System Series product offering.
