About the DS200IOEAG1ADB
The DS200IOEAG1ADB from General Electric functions as an input/output (I/O) expansion board for a Mark V turbine control system. The Mark V is one of General Electric’s many Speedtronic systems, all designed to manage and control industrial turbine systems. Mark V systems can be used for either Simplex or TMR (triple modular redundant) systems. This particular DS200IOEAG1ADB I/O Expansion Board is not actually the original product with its intended functionality that exists within the Mark V Series, as it modifies the original DS200IOEAG1 parent printed circuit board through its inclusion of two functional product revisions and a single B-rated artwork configuration revision, and doesn't make use of any special version of Mark V Series assembly.
Hardware Tips and Specifications
The DS200IOEAG1ADB is typically used in gas turbine systems, which should not come as a surprise given its initial attribution to the Mark V Turbine Control System Series. The unit is a narrow, rectangular board drilled out in each corner to allow for mounting, as well as being drilled at the center of each long board edge. The DS200IOEAG1ADB board includes PROM connectors (C6, C7, C8) that store drive parameters and can be moved from board to board; make sure to take precautions to limit static when moving PROM modules or data corruption could occur. The DS200IOEAG1ADB board's assembly also includes multiple connectors, resistor network arrays, capacitors, and transistors for voltage limiting purposes. Some of the board is set up with spare PTH where other components are designed to mount on other versions. Most components in the assembly fo this DS200IOEAG1ADB IO Expansion Board are marked with some sort of reference designation and/or original manufacturer id, which can help with additional supplementary information. The board and the Mark V system also have in-depth manuals and user guides that will provide you with more information regarding their use and proper handling, although these manual materials may be hard to track down given the generally low market availability of this Mark V Series PCB.
This DS200IOEAG1ADB I/O Expansion Board is a General Electric printed circuit board product offering that, as explained above, doesn't have a whole lot to offer in terms of original instructional manual documentation. This being the case, the DS200IOEAG1ADB alphanumeric product number itself can be considered a strong source of hardware-specific information for this DS200IOEAG1ADB PCB, as it mentions:
- A normal style of Mark V Series assembly
- A domestic location of original manufacture
- The IOEA functional product acronym
- A normal style of printed circuit board protective coating
- A full three-fold revision history
The normal style of printed circuit board coating that has been applied to this DS200IOEAG1ADB PCB exists as a thick, rudimentary base layer of printed circuit board insulation and protection that envelops and protects individual hardware elements on the DS200IOEAG1ADB PCB's base board on a functional priority basis. This DS200IOEAG1ADB PCB would be protected by a standard three-year product warranty immediately upon your original AX Control purchase.
