About the DS200KLDAG1
The DS200KLDAG1 is a GE Mark V Speedtronic component board. The Mark V is one of the later gas/steam turbine control systems released as part of the Speedtronic line. It includes TMR architecture with available online maintenance and built-in diagnostics. AX Control has DS200KLDAG1 available as reconditioned units that have been thoroughly tested by our in-house technicians and as liquidated new-used stock. While one of the more recently-developed General Electric product series to make use of their patented Speedtronic control system technology; this DS200KLDAG1 product's greater Mark V Turbine Control System Series must be considered to be a General Electric legacy series, given its manufacturing discontinuation in the years following its initial release. This DS200KLDAG1 PCB is the originally-developed product of its functionality to feature in the Mark V Series, as its DS200KLDAG1 functional product number does not possess any trailing revision digits.
Hardware Tips and Specifications
The DS200KLDAG1 is an LED Key Display Control Board, and utilizes its own particular series of hardware component inclusions and specifications to reach this functionality. This rectangular board has seven small auxiliary boards, each with an LED display that is capable of displaying up to ten sixteen-segment digits. The auxiliary boards connect to the primary board using brass pin connectors and are held in place by standoff pins. Other board components on the DS200KLDAG1 include a single vertical pin cable connector, three jumper switches, a transistor, thirty-two individual red LED indicators, fourteen resistor network arrays, two right-angled connectors, diodes, resistors, and capacitors. The board also has eighteen integrated circuits. These include three field programmer gate arrays and an oscillating chip. The DS200KLDAG1 is marked with the GE logo, with codes like 6BA03, and C-ESS. The edges of the board are drilled for mounting and marked for alignment. For a more detailed description of the board and its use, or for step-by-step instructions regarding proper handling or installation, please refer to technical support products like user guides and manuals from GE.
Unfortunately, any instructional manual pertaining to this DS200KLDAG1 product offering specifically will have to have been retrieved upon your original purchase of the DS200KLDAG1 product, given the fact that it exists as a member of a General Electric legacy series that does not have internet-available instructional manual materials. With this being true, the DS200KLDAG1 functional product number itself can be considered a strong source of DS200KLDAG1 board-specific hardware component inclusion and specification information, beginning with its DS200 series tag holding dual DS200KLDAG1 board naming conventions. The DS200 series tag at the very beginning of the DS200KLDAG1 functional product number describes this DS200KLDAG1 PCB's normal Mark V Turbine Control System Series assembly type as well as its domestic location of original manufacture. Some of the other helpful hardware details revealed by the DS200KLDAG1 functional product number include this DS200KLDAG1 Board's:
- KLDA functional product acronym
- Normal PCB coating style
- Group one Mark V Series product grouping
- Possession of no revisions
The normal style of PCB coating applied to this DS200KLDAG1 product offering exists as a thick chemically-applied layer of daily wear and tear circuit board protection that envelops and protects individual DS200KLDAG1 board hardware components on a functional priority basis. Before making a final purchase decision on this DS200KLDAG1 printed circuit board, it is crucial to understand that this specific DS200KLDAG1 device exists as the originally-developed product of its Mark V Series functionality, without any enhanced functionality or assembly as necessitated by the insertion oy any one functional or artwork configuration revision.
