About the DS200KLDBG1ABC
The DS200KLDBG1ABC is a GE component used within the Mark V Speedtronic system. The Mark V was one of the last of the Speedtronic systems for the control of gas or steam turbines. It is a flexible microprocessor-based control system with TMR architecture, designed with built-in diagnostics and online maintenance. The DS200KLDBG1ABC is no longer sold by GE, but can be found through AX Control as both a reconditioned unit and as liquidated surplus (new-used) stock. Please note that DS200 series boards are older units without updated firmware or components; if these updates are necessary for your system please review similar boards in the DS215 series.
Hardware Tips and Specifications
The DS200KLDBG1ABC functions as a display board. It is a large, rectangular board with only a few well-spaced components. This includes thirty-two vertical light components placed in four lines of eight in the bottom right quadrant of the board. Integrated circuits and resistor network arrays are placed between these lights. More integrated circuits are clustered in the bottom left corner, including field programmable gate arrays and at least one oscillating chip. The DS200KLDBG1ABC board has several board connectors, including two vertical pin components. The board has two jumper switches. Various capacitors, diodes, and resistors are also made available to the assembly of this DS200KLDBG1ABC product offering; hardware components of this type have been provided for various excess voltage-limiting and consuming purposes. The top of the board is populated by seven LED displays. These displays are designed for numerical display, using sixteen-segment digits. The board is marked with codes like C-ESS and 6BA01. The corners and edges of the board are drilled to allow for mounting. Refer to technical support products like data sheets or user guides for more information.
The previously-included DS200KLDBG1ABC hardware component and component specification information is solely reminiscent of this DS200KLDBG1ABC printed circuit board's thorough visual inspection, as the DS200KLDBG1ABC PCB's greater Mark V Turbine Control System Series is not well-documented in internet-available instructional materials. With this in mind, the DS200KLDBG1ABC functional product number gains a new importance in this case as it displays many of the DS200KLDBG1ABC product offering's hardware details in separate functional naming chunks, beginning with the DS200 series tag holding dual naming responsibilities for the DS200KLDBG1ABC PCB. The DS200 series tag at the beginning of the DS200KLDBG1ABC functional product number is telling of this DS200KLDBG1ABC PCB's domestic location of original manufacture as well as its normal style of Mark V Series printed circuit board assembly. This dual-functional series tag is followed in the DS200KLDBG1ABC functional product number by the KLDB functional product abbreviation, which was created to exist as a functional shorthand alternative to the DS200KLDBG1ABC functional product number. Some of the other DS200KLDBG1ABC Key/LED Display Board information stored in its specifically-developed DS200KLDBG1ABC product number includes this DS200KLDBG1ABC PCB's normal style of PCB coating, its group one Mark V Series product grouping, and finally its full revision table including two functional revisions and an artwork configuration revision.
