About the DS200KLDCF1
The GE Software PROM Set DS200KLDCF1 features two PROM modules for use with GE Speedtronic Mark V boards. The PROM modules in the GE Software PROM Set DS200KLDCF1 are used to store the configuration parameters for the drive. As evidenced through the lack of a trailing alphanumeric digit in the DS200KLDCF1 product number, this Mark V Series printed circuit board does not make use of any significant product revision in its assembly.
Hardware Tips and Specifications
This DS200KLDCF1 Software PROM Set is a General Electric Mark V PROM Module that exists as a highly-specialized product within its greater Mark V Series. With this in mind, it should come as no real surprise that this DS200KLDCF1 Software PROM Set possesses a series of specific and essential specifications detailing replacement procedures. When you replace the PROM modules, it is best practice to first download the existing configuration file from the old PROM module to a laptop or other device. First, connect a serial cable from the drive to the laptop. You must use a serial cable that is no more than 6 feet long and it must also have connectors that fit the ports on the laptop and the connector on the drive you are using for serial communications. From the control panel on the drive, access the menu that enables you to initiate the download procedure. The control panel has a keypad that enables you to navigate the menus and select to start the download. Make sure the serial port on the laptop is also configured properly for the task. When the download is complete the control panel will indicate that the download was successful. If necessary, you can edit the configuration file while it resides on the laptop. If that is the case an editing tool is available for that purpose. However, in most cases if the configuration supports the activity you need, further editing is not necessary. It is important to consider that the PROM modules are sensitive to static so it is vital that you wear a wrist strap when you install the modules or perform any service on the drive components.
This DS200KLDCF1 Software PROM Set has a normal number of hardware components standard to any Mark V Series product, as specified by its DS200 normal series tag. This is the first of several pieces of specific hardware detail retrievable from the DS200KLDCF1 functional product number. Some of the other information obtainable from this DS200KLDCF1 product number includes:
- A domestic location of original manufacture
- The KLDC functional abbreviation
- A special F-style PCB protective coating
- a group one Mark V Series grouping
- No functional or artwork product revisions
