About the DS200KLDCF1A
This DS200KLDCF1A General Electric printed circuit board is more explicitly-definable as a Software PROM Set, the original functional description it received in factory-printed General Electric and Mark V Series instructional manual materials. This DS200KLDCF1A Software PROM Set is a General Electric printed circuit board or PCB for short with a normal Mark V Series assembly version, as made obvious through the inclusion of the DS200 series tag at the very beginning of the DS200KLDCF1A functional product number. This DS200KLDCF1A Mark V Series printed circuit board is not the original Software PROM Set that was manufactured for General Electric's Mark V Turbine Control System Series, however, as it is editied from the original DS200KLDCF1 parent printed circuit board through its singular added functional product revision. It is a bit of a surprise that this DS200KLDCF1A Software PROM Set is only considered to have a normal Mark V Series assembly, as it is classified as a Software Set and not a Software Board, indicating some sort of modular status.
Hardware Tips and Specifications
As with any Mark V Turbine Control Series product, this DS200KLDCF1A PCB has its own series of specific and intentional hardware components and component specifications, which all contribute towards its status as a Software PROM Set. For starters, the GE Software PROM Set DS200KLDCF1A features two PROM modules for use with GE Speedtronic Mark V boards. These PROM modules store the parameters you define for the greater Mark V Series automated drive configuration. The information on the DS200KLDCF1A device's PROMs can be edited and updated on the PROMs themselves. There are two methods to edit the configuration file; the most direct method is to edit the configuration through the control panel on the drive. This DS200KLDCF1A printed circuit board's control panel consists of a keypad to navigate through the configuration and apply changes. There is also a two-line display for viewing the information; this two-line display also shows conditions in the drive that have caused warning and error messages. For example, if an overheat condition exists, a message will display. There is a series of menu selections that assist you in locating the section of the specific DS200KLDCF1A board configuration you want to change. This DS200KLDCF1A product's user interface is also useful for other tasks, such as performing downloads through the serial connection. Using the control panel to make changes to the configuration is most useful for making small updates but is cumbersome for making large scale changes to the configuration of this DS200KLDCF1A Software PROM Set.
The above paragraph represents about the extent of information available from a visual inspection of the DS200KLDCF1A board, paired with any fringe information retrievable from original Mark V and General Electric instructional materials. With this being said, this DS200KLDCF1A Software PROM Set possesses a General Electric functional product number, which provides a plethora of relevant hardware information for this DS200KLDCF1A product. The DS200KLDCF1A functional product number contains hardware specification information including this DS200KLDCF1A board's normal Mark V Series assembly, domestic manufacture location, KLDC functional acronym, normal style of PCB coating, Group One Mark v Series Grouping, and A-rated functional product revision. Before making a complete purchase decision on this DS200KLDCF1A General Electric printed circuit board, it is important to be cognizant of the fact that this DS200KLDCF1A PCB's A-rated functional product revision may alter its originally-introduced performance specifications and dimensions greatly.
