About the DS200LDCCG1AGA
The General Electric DS200LDCCG1AGA is a drive control and LAN communications board (LDCC) from the Mark V series. This board was specifically developed to interface with GE’s family of DIRECTO-MATIC 2000 drives and exciters. Featured on this board are four microprocessors, I/O and motor control, and LAN communications. When installed, this board provides users with an array of expanded I/O and device functions. The Mark V Series that this DS200LDCCG1AGA product offering exists as a member of is a legacy series, as it has been discontinued in the years following its initial General Electric release. With this being true, this DS200LDCCG1AGA printed circuit board's greater Mark V Turbine Control System Series is also definable as one of the final General Electric Mark product series to make use of their patented Speedtronic control system technology. While this DS200LDCCG1AGA PCB is definable as a Drive Control/LAN Communications Board in its own right, the original product of that specific functionality to feature within the Mark V would be the DS200LDCCG1 parent printed circuit board missing this DS200LDCCG1AGA product offering's three significant product revisions.
Hardware Tips and Specifications
As with any General Electric Mark V Turbine Control System Series printed circuit board, this DS200LDCCG1AGA PCB makes use of its own series of functionality-introducing hardware components and component specifications. The DS200LDCCG1AGA includes four microprocessors that provide an array of motor control and I/O functions. Included microprocessors include the drive control processor (DCP), the motor control processor (MCP), the co-motor processor (CMP), and the LAN control processor (LCP). The DCP performs analog and digital I/O conversions in addition to I/O peripherals like decoders and timers. MCP functionality includes motor control systems as well as digital I/O communications. When the processing power the MCP is not enough, the CMP will activate. The CMP can calculate advanced mathematics problems that the other is incapable of performing. LAN communications are processed by the LCP, which is capable of accepting DLAN+, DLAN, Genius, CPL, and C-bus bus systems. Error codes and other diagnostic information is available and accessible using the GE programmer keypad.
For customization options, both Berg-type manually-moveable and hard-wired jumpers are made available to this DS200LDCCG1AGA printed circuit board's assembly. Each jumper included in the assembly of this DS200LDCCG1AGA product is accompanied by its own factory-printed nomenclature label beginning with the J digit designating a jumper component, except for the WJ1-WJ4-labelled jumpers. These specific jumpers in the assembly of this DS200LDCCG1AGA product recieve the W naming tag as they are reserved entirely for future DS200LDCCG1AGA board applications, as detailed in the original instructional manual attached above.
Installation parameters from the manufacturer should be followed to protect the board from accidental damages. A complete wiring guide for DS200LDCCG1AGA is available in the board’s manual and datasheet. Technical support for this unit, as well as the Mark V series, was originally provided by the manufacturer, General Electric. AX Control’s trusted sales team is happy to assist with all of your automation needs. To receive current prices and availabilities on all parts and repairs, please contact our office by phone or email. Before making a final purchase decision on this DS200LDCCG1AGA Drive Control/LAN Communications Board, it its critically important to note that this DS200LDCCG1AGA product offering is updated from its originally-introduced base performance specifications and revisions through its insertion of three total significant product revisions; two functional revisions and an artwork revision rated at A, G, and A grades respectively.
