About the DS200SHVMG1ACC
DS200SHVMG1ACC is a high voltage M-frame interface board designed by General Electric for their Mark V Turbine Control System series of boards. As many of the series members are optional or replacement boards, this card can be used across a number of GE brand drives. This DS200SHVMG1ACC printed circuit board or PCB for short's greater Mark V Series, as indicated by the full extended series name provided above, has specific applications in the control and management systems of popular and compatible wind, steam, and gas turbine automated drive assemblies. This DS200SHVMG1ACC printed circuit board or PCB for short's greater Mark V Series is additionally considered to exists as a now-obsolete legacy General Electric product series, as it was discontinued due to obsolescence in the many years following its original General Electric release. The Mark V Series that this DS200SHVMG1ACC SCR High-Voltage M-Frame Interface Board belongs to is at least well-updated in one respect, as it exists as one of the final General Electric Mark product series to incorporate their patented Speedtronic control system technology into its varied options. This DS200SHVMG1ACC PCB is the original, base-revised version of its specific Mark V Series functional product, as evidenced by its DS200SHVMG1ACC functional product number's lack of any trailing revision-indicating digits.
Hardware Tips and Specifications
This board allows for interfacing between the SCR bridge on the M-frame drive and the DCFB or SDCI power supply board and the PCCA powerconnect card. A number of drive functions are included when this board is installed into a drive. -500 to 500 mV shunt signals are converted by DS200SHVMG1ACC into differential frequency outputs ranging from 0 to 500 kHz. These conversions occur using the DC positive and negative voltage controlled oscillator (VCO) circuits. Once converted, these signals are transmitted to the PCCA card or the DCFB/SDCI board. AC line currents are provided with a 10:1 current transformer attenuation. Any of the 17 onboard jumpers can be configured depending on attenuation requirements. A series of standardized connectors have also been identified in the assembly of this DS200IQXSG1 printed circuit board, in the DS200IQXSG1 instructional manual attached above in our manuals tab for your convenience. This DS200SHVMG1ACC PCB's connectors, like any hardware component in this Mark V Series product's assembly, are all accompanied by their own factory-printed nomenclature labels. Both I/O and Stab styles of connectors are available in this DS200IQXSG1 High-Voltage M-Frame Interface Board's normal Mark V Series assembly. This DS200SHVMG1ACC PCB's I/O Connectors include:
- The IA2PL-1 Motor Armature Current Shunt Differential VCO Positive Output Connector
- The IA2PL-2 Motor Armature Current Shunt Differential VCO Negative Output Connector
Each of these two aforementioned connectors in the assembly of this DS200SHVMG1ACC Mark V Turbine Control System Series product offering have been named through a combination of their factory-printed nomenclature labels and the specific signal that they transmit in the assembly of the DS200SHVMG1ACC PCB and its greater Mark V Series automated drive assembly. This DS200SHVMG1ACC PCB's stab connections are much more frequent in number, and are similarly listed in this DS200SHVMG1ACC product's attached DS200SHVMG1ACC instructional manual materials. Basic voltage limitation and suppression in the assembly of this DS200SHVMG1ACC printed circuit board are typically handled through its normal assembly's acceptance of series-standardized voltage-limiting hardware components such as rectifiers, capacitors, and resistors. The board as well as the drive have a set of provided installation parameters that should be met. Following these instructions will prevent any accidental damages to the overall drive system. For a guide to wiring and installing the board, please refer to the series manual and device datasheet. Technical support for DS200SHVMG1ACC and other members of the Mark V series was originally provided by General Electric. Our trusted team at AX Control is happy to help with all of your DS200SHVMG1ACC needs. Please contact a member of our sales team to receive current prices on this and all other parts and repairs.
