About the DS200SLCCG3AHB
The DS200SLCCG3AHB card is a LAN (local area network) communication board developed by General Electric. It is a member of the Mark V series of replacement drive boards, which is one of the relatively new General Electric product line featuring the trademark Speedtronic techology. As an integral component of the Mark V Series automated drive, this card is designed to function in a number of exciters and drives across the GE family. Installing this board provides the host with the space needed to process LAN communications signals sent to the drive. This DS200SLCCG3AHB LAN Communication Card is not the original LAN Communication Card produced by General Electric for their Mark V Series; that would be the DS200SLCCG3 parent printed circuit board missing this DS200SLCCG3AHB PCB's three significant product revisions.
Hardware Tips and Specifications
This DS200SLCCG3AHB LAN Communication Card is a crucial component member of its greater Mark V Series of turbine control systems and turbine control system components. Signals sent to the DS200SLCCG3AHB board from elsewhere in the Mark V Series automated drive assembly are filtered using the integrated LAN control processor (LCP). The board features two removable EPROM memory cartridges used to store the program data for this aforementioned LCP. Space is also provided by the dual ported RAM for the LCP to interface with the drive’s drive control board. Isolated and nonisolated circuits are also included on the DS200SLCCG3AHB card for a number of communications signal possibilities. This DS200SLCCG3AHB LAN Communication Card has three total significant product revisions, as mentioned earlier. Two of these three revisions are functional product revisions, aimed at increasing the overall performance specifications of this DS200SLCCG3AHB Mark V Series product, while the third revision made to the normal assembly of this DS200SLCCG3AHB PCB is an artwork configuration revision that alters the positioning of individual hardware elements on this DS200SLCCG3AHB PCB's base circuit board. All of the aforementioned DS200SLCCG3AHB hardware components should receive some form of daily wear and tear protection from the exhaustive layer of normal PCB coating applied to this DS200SLCCG3AHB circuit board.
An attachable keypad programmer is included with the board's assembly. This device provides easy access to a number of system control and diagnostic features. Any device shipped from AX Control will be protected by a static resistant plastic bag. Remove the board from its container only after carefully reviewing all provided storage and installation parameters. Only permit qualified personnel to handle and install the DS200SLCCG3AHB drive, as it is a static-sensitive and fragile Mark V Series product. Directions for wiring this LAN communications board are available in the series manual and the device datasheet originally provided with your primary purchase from General Electric. Our trusted sales staff at AX Control is happy to help with all of your automation needs. Please contact our office to receive pricing information for the DS200SLCCG3AHB, as well as any other needed part or repair.
