Product Description
This unit is designated as a Brake Control Circuit Board module, alphanumerically labeled as the DS2020BRCBG2A. This unit is one of the standard printed circuit boards, the DS200 units. These circuit boards are installed and mounted into the Speedtronic Mark V turbine management systems. The Mark V Series that this DS2020BRCBG2A product belongs to is a legacy series, as it is no longer in active production by its General Electric manufacturer. With that being said, the Mark V Series is one of the more recently-developed Speedtronic technology-powered product series made by General Electric, which started with the Mark I in the late 1960s. This DS2020BRCBG2A Brake Control Circuit Board is not the original product with its intended functionality to exist within the Mark V Turbine Control System Series; that would be the DS2020BRCBG2 Brake Control Circuit Board missing this DS2020BRCBG2A product's singular functionality-enhancing product revision.
Hardware Tips and Specifications
The DS2020BRCBG2A module is provides the braking and speed control capabilities of the turbine system, which is able to ensure that the turbine is stable. Given this crucial intended Mark V Series functionality, it should come as no surprise that this DS2020BRCBG2A printed circuit board comes equipped with a specific and elevated series of individual hardware components. The motors connected within the turbine power generation system are unable to be overworked, and are properly regulated and able to be replaced or repaired with a greater passage of time between the intervals. Unfortunately for our purposes, this DS2020BRCBG2A Brake Control Circuit Board is a Mark V Series product that doesn't seem to be as well-documented as some other General Electric printed circuit boards available here. With that being said, most of the information stored on this personalized product page will be representative of details pulled from a visual inspection of the DS2020BRCBG2A model PCB and its DS2020BRCBG2A functional product number.
The DS2020BRCBG2A functional product number begins with the DS2020 series tag, which has dual naming responsibilities for this DS2020BRCBG2A product. The DS2020 series tag details this DS2020BRCBG2A PCB as a special-assembly version of Mark V Series printed circuit board that was domestically manufactured in General Electric's Salem, Virginia factory plant location. This DS2020 series tag is followed in the DS2020BRCBG2A functional product number by the BRCB functional product acronym, which itself is followed by the G2 series grouping tag detailing this DS2020BRCBG2A board's normal style of PCB circuit board protective coating and its Group 2 Mark V Series product grouping. The final A digit in the DS2020BRCBG2A functional product number is telling of this Brake Control Card's applied A-rated functional product revision. The modular assembly style of this DS2020BRCBG2A Brake Control is immediately obvious upon a basic visual inspection of the DS2020BRCBG2A device, which reveals other information including a standard number of voltage-limiting components including diodes, resistors, and capacitors. As specified by stickers applied to the metal chassis of this DS2020BRCBG2A product, the DS2020BRCBG2A printed circuit board has an intended amperage of 1 AMPs and a specific voltage rating of 600 input volts.
