About the DS215DENCG3AZZ01A
The DS215DENCG3AZZ01A is a GE Mark V Turbine Control System Series board component manufactured for use within one of the later Speedtronic systems. The Speedtronic control system technology seen in this DS215DENCG3AZZ01A product and its greater Mark V Series was first release to the automated industrial community with the conception of the Mark I Series in the later 1960s. The Mark V Series is a rather self-explanatory product series, as it was designed to offer control for gas and steam turbines with triple modular redundant fault tolerance operating with the use of microprocessors. The MKV can be designed as a TMR or as a Simplex system depending on the needs of the turbine system. The MKV uses a modular design for simple maintenance. While these board components are no longer fabricated by the OEM, they can be purchased from AX Control as reconditioned, optimized units. These board components are not fabricated by General Electric due to a manufacturer-identified functional series obsolescence and concurrent manufacturing discontinuation that took place in one of the many years following its initial GE series rollout.
Hardware Tips and Specifications
The DS215DENCG3AZZ01A is a small board component with only a few board components. This includes multiple connectors typically placed along the board’s edges, including two vertical pin cable connectors, a right-angled header connector, and two sets of taller brass pins. The board has seven jumper switches, as well as transistors, resistor network arrays, individual metal film resistors, capacitors, and diodes; most of these listed components have been installed in the special assembly of this DS215DENCG3AZZ01A product offering as Mark V Series-standardized hardware components meant for voltage suppression and protection purposes, specifically. It has over twenty integrated circuits, including field programmable gate arrays. It also has a long LED numerical display board placed on the left side of the board. Given the fact that this DS215DENCG3AZZ01A printed circuit board product offering's base circuit board does not make use of any sturdy metal faceplate, it can be theorized that this DS215DENCG3AZZ01A Circuit Board with Firmware is not installed in General Electric's Mark V Series' standard VME Rack assembly.
The DS215DENCG3AZZ01A is drilled in each board corner to allow for mounting. The board surface is marked with several identifying codes and most components are marked with reference designators and/or original manufacturing codes. For a more detailed description of the DS215DENCG3AZZ01A, please refer to technical support products provided by GE with OEM purchases. This includes manuals and user guides with detailed descriptions regarding installation procedures and proper handling. Given the fact that this DS215DENCG3AZZ01A printed circuit board product offering belongs to a now-obsolete legacy product series, the DS215DENCG3AZZ01A functional product number itself can be identified as a primary source of DS215DENCG3AZZ01A Board hardware component and component specification detail; due to this DS215DENCG3AZZ01A PCB's legacy product series attribution. The DS215DENCG3AZZ01A functional product number codes for a selection of various DS215DENCG3AZZ01A Board details in a series of consecutive functional naming components. For instance, the DS215DENCG3AZZ01A functional product number starts off with the dual-functional DS215 series tag detailing this DS215DENCG3AZZ01A board's special Motherboard Mark V Series assembly as well as its domestic original manufacture location. Some of the other relevant hardware details revealed through the DS215DENCG3AZZ01A functional product number include this DS215DENCG3AZZ01A PCB's:
- DENC functional product abbreviation
- Normal PCB coating style
- Group 3 Mark V Series product grouping
- Attached optional firmware package
- A-rated primary functional revision
