About the DS215SLCCG2AZZ01B
The printed circuit board known as DS215SLCCG2AZZ01B is one of several LAN Communications Cards available for General Electric’s Mark V turbine control system. There are three different versions of the SLCC board manufactured by GE: the SLCCG1A boards, SLCCG2A boards, and SLCCG4A boards. Please be sure to order the correct configuration for your system. This board includes circuitry for connecting the drive to DLAN networks only; If you need to connect to ARCNET, look at SLCCG1A versions of this board. This DS215SLCCG2AZZ01B printed circuit board is not the original style of LAN Communication Card made available to the Mark V Turbine Control System Series; that would be the DS215SLCCG2AZZ01 LAN Communication Card missing this DS215SLCCG2AZZ01B product's singular B-rated functional revision. This SLCC-abbreviated Mark V Series printed circuit board has a special Mark V Series assembly type, as codified in the DS215SLCCG2AZZ01B functional product number through the inclusion of the special DS215 series tag.
Hardware Tips and Specifications
The DS215SLCCG2AZZ01B board is used within the Mark V system in conjunction with the SDCC drive control card. Because of this, this DS215SLCCG2AZZ01B printed circuit board utilizes a series of unique and specific hardware components and component specifications. The main processor on the SLCC board is the LAN control processor located at factory-labeled position U1. Software for the DS215SLCCG2AZZ01B LAN Communication board is stored in replaceable EPROMS; these are located at positions U6 and U7. While the board is not software configurable, these EPROMS can be moved or replaced, allowing for some level of customization. Meanwhile, RAM for communications and dedicated RAM is located at U5, U8, and U9. Hardware configuration includes wire jumpers and several jumper switches, as explained in the various datasheet and instructional manual materials inserted in the manuals tab above.. The DS215SLCCG2AZZ01B board typically mounts onto the SDCC board using four standoffs connected into four factory drilled holes on the SLCC card. Other board components include resistor network arrays, resistors, capacitors, vertical pin connectors, and a multi digit alphanumeric display.
Several jumpers are incorporated into the internal assembly of this DS215SLCCG2AZZ01B Mark V Series Group 2 product's internal assembly to aid in customization. Two different types of jumper are identifiable in this SLCC-abbreviated printed circuit board's assembly; both Berg-type and Wire jumpers are available. Berg-type jumpers in the assembly of this DS215SLCCG2AZZ01B PCB are identifiable by the factory-printed JP nomenclatures, wile Wire jumpers seem to be accompanied by the WJ nomenclature. Five total wire jumpers and six Berg-type jumpers are available to the internal assembly of this General Electric device, as specified once more in attached pertinent instructional materials.
