IS200AVIFH1A

About the IS200AVIFH1A

The IS200AVIFH1A is a PCB component made to be a part of the Mark VI system. The MKVI is part of the GE Speedtronic gas/steam turbine management series that began in the 1960s with the release of the MKI and has continued through the 2000s with later systems like the MKVI and MKVIe.  The MKVI is usually powered from a 125 VDC battery system or uses a 120/240vac source with an isolation transformer that rectifies power to 125 VDC. This power is fed to internal power supplies for the Control Modules, for its expansion modules, and for termination boards to power field contact inputs and field solenoids.

The IS200AVIFH1A is a component-dense board that includes five transformers; three of these transformers are marked 156DC005 770097-9 70-0087 4100.   The board has three heat sinks. These are placed in the upper left corner of the board. The board has multiple connectors, including four stab-on connectors, one vertical pin ribbon connector, and eleven header connectors that vary from two pins to eight pins.   The board has several transistors, two jumpers, two fuses, and several integrated circuits.

The IS200AVIFH1A is built with various resistors, including metal film resistors.  The board has polyester vinyl capacitors, high-voltage electrolytic capacitors, and other capacitors.  There is one varistor. The board is marked with the board number, the GE logo, and the codes 6DA02 and 6BA02.  

AX Control offers a variety of shipping options through large world-wide carriers. We are also happy to work with your courier service. Blind shipping is available.