About the IS200BPIIH1A
The IS200BPIIH1A is a Bridge Power Interface Board that is used within the GE Speedtronic Mark VI Series. The Mark VI Series that this IS200BPIIH1A device is a component member of can actually be extended out to the Mark VI Turbine Control System Series, an offifical GE product series that in something of a self-explanatory turn applies specifically to the control and management systems of popular and GE-compatible gas, steam, and wind turbine automated drive assemblies. This is a massive functional improvement upon the previously-developed Mark V Turbine Control System Series of just about the same full extended series title, as the Mark VI Series was created to add the more alternative energy-focused wind turbine possible application onto the gas and steam turbine-based ones released with the Mark V.
Hardware Tips and Specifications
The IS200BPIIH1A is used within Innovation Series Drives. It interfaces with IGCT switching devices and provides a number of feedback signals, control signals, and accessibility points for other boards like the Expander Load Source Board (IS200GGXIG) in conjunction with the BICI board. The BPII board uses RS-422 connectors to communicate gate commands and status signals. It also relays up to 24 gate status feedback signals and gate firing commands between GGXI boards. The IS200BPIIH1A is designed with two 128-pin backplane connectors that are labeled P1 and P2. The board also has two 68-pin connectors mounted into its front faceplate. These are labeled JGATE1 and JGATE2, and are typically used to interface with GGXI boards. The front faceplate also has two clips to hold the board in place after it is inserted into a rack system and is marked with the GE logo, the board’s identification number, and a warning to “install in slot 6 only.” Boards that are installed improperly may be damaged or may damage the system. The IS200BPIIH1A also has four TP test pods located on its surface. These are located in two parallel lines. These test pods are used during board development and are not used once the board has been installed.
For more detailed information about the workings of or installation procedures for the IS200BPIIH1A board, please refer to the original datasheet or manual provided with your OEM equipment. If documentation is no longer available, we may be able to provide replacements with your order. This IS200BPIIH1A printed circuit board product offering or just PCB for short is really not trailed online by too many originally-printed instructional documents, which means that its IS200BPIIH1A functional product number itself can be introduced as a fine functional source of IS200BPIIH1A device hardware component and component specification information, being that it codes for a series of important IS200BPIIH1A device qualities through a series of consecutive functional naming elements. One of these mentioned elements is the dual-functional IS200 series tag that is dual functional as it introduces both this IS200BPIIH1A product's normal Mark VI Series assembly as well as its domestic original GE manufacture place. Some of the other IS200BPIIH1A device qualities indicates in this fashion are its:
- BPII functional product acronym
- Group one Mark VI Series grouping
- Conformal PCB coating
- A-rated revision
