About the IS200DSPXH1BDB
The IS200DSPXH1BDB is a Digital Signal Processor Board for the General Electric Innovation Series. The innovation Series that this specific IS200DSPXH1BDB printed circuit board product offering was originally manufactured for is but a smaller component subseries of the greater Mark VI Turbine Control System Series that it was originally designed for in specific. As you have more than likely been able to deduce based off of its full extended GE product series title, the Mark VI Series that this IS200DSPXH1BDB product belongs to exists with a specific intended series of functional applications in the management and control systems of General Electric-compatible gas, steam, and wind turbine automated drive assemblies. This can be defined as quite the significant functional upgrade upon the previously-existing Mark V Turbine Control System Series of a similar full extended product series title, as the Mark VI Series exists with gas and steam-based environments alone.
Hardware Tips and Specifications
The IS200DSPXH1BDB, also known as a DSPX, has the ability to control both the bridge and motor regulators and all of the system’s gate functions. It can also control the general field control applications for an EX2100 exciter. The DSPX board can process logic functions and power and has the ability to interface with other boards. Several memory components that come standard with other Innovation PCBs also come standard with this board. It uses NVRAM, RAM, add-only memory, and flash memory that can store a wide range of information. On the front faceplate of the IS200DSPXH1BDB, there are two LED indicators that have been labeled Status and Fault. There is a 12-pin male connector labeled EMUL and a 16-pin male serial port that is labeled HS Serial. There are numerous diodes, capacitors, and resistors on this PCB. There are 3 transistors, 6 ferrite beads, a card slot connection labeled P1, 16 integrated circuits, and 7 resistor networks. This IS200DSPXH1BDB device is not the originally-developed product of its specific General Electric Mark Series functionality, as that would have to be considered the IS200DSPXH1 parent printed circuit board not utilizing this IS200DSPXH1BDB PCB's three-fold PCB revision total.
When installing the IS200DSPXH1BDB into a system, it is vital to ensure that it is installed into the correct card slot on the rack. The card slots on the Innovation rack are specifically keyed to specific boards. If a board that it is not paired with is placed into the slot, the board or the slot may become damaged. It is also important to remember to maintain antistatic procedures when handling or installing the DSPX to avoid damage due to a buildup and release of static electricity. Given this IS200DSPXH1BDB product's placement within the Mark VI Turbine Control System Series, it is a bit of a surprise to find that this IS200DSPXH1BDB device is relatively well-detailed in online-available instructional manual materials. With this being the case, this IS200DSPXH1BDB device's specific external interrupts are made obvious through their true full extended factory-printed nomenclature labels. Some of the interrupt components made available to this IS200DSPXH1BDB device's normal Mark VI Series assembly include its:
- INT0 Stack Overflow Interrupt
- INT1 Inner Loop Load Pulse Interrupt
- INT2 and INT3 Configurable Input Interrupts
