About the IS200DTAIH1A
The IS200DTAIH1A is a printed circuit board or PCB produced for the Mark VI series by General Electric or GE. The Mark VI is one of several series released in the Mark line. These series are used for the control of gas turbine systems.
Hardware Tips and Specifications
The IS200DTAIH1A is a long, slim circuit board which is rectangular. Sitting along the right side of the IS200DTAIH1A, there are a pair of two (2) long terminal blocks. Like the surface of the circuit board, these terminal blocks are green. The terminal block on the far right contains twenty-four (24) metal terminals which are silver. The second terminal block also contains a total of twenty-four (24) silver metal terminals. In the center of the IS200DTAIH1A, there are four (4) small circuit boards which are positioned vertically on the PCB. These small boards are arranged in two (2) pairs. Sitting at the bottom edge of the IS200DTAIH1A sitting between two of the small circuit cards are two (2) blue capacitors. At the lower right corner of the IS200DTAIH1A, there is a small line of four (4) blue jumpers. These jumpers may be used to alter the operations of the board. Sitting along the left edge of the IS200DTAIH1A is a long connector port. The port is black and surrounded by a silver border. A group of four (4) black components is placed directly in the center of the IS200DTAIH1A. Between these components and the connector port, there is a line of transistors which are black and shaped like half circles.
As you have likely been able to tell based off of the methodically-described IS200DTAIH1A hardware details paragraph above, this IS200DTAIH1A product has so far been described solely through a full breakdown of the IS200DTAIH1A product itself in the form of a diligent visual inspection as led by one of our experienced and passionate lead circuit board service technicians. With this being the case, this IS200DTAIH1A PCB's IS200DTAIH1A functional product number here can also be embraced as a fine source of IS200DTAIH1A Board hardware component and component specification information, as it was specifically designed by the trusted automated industrial retail giant to code for a series of most-critical IS200DTAIH1A device hardware qualities in a set of consecutive functional naming elements. The IS200DTAIH1A functional product number begins with a standard inclusion of the dual-functional IS200 series tag indicating both this IS200DTAIH1A device's normal Mark VI Series assembly as well as its domestic original GE manufacture location. Some of the other important IS200DTAIH1A device qualities told in this way are this IS200DTAIH1A Terminal Board's:
- DTAI functional product acronym
- Group one Mark VI Series grouping
- Conformal PCB coating type
- A-rated functional revision style
