About the IS200ECTBG1ABB
This IS200ECTBG1ABB Excitation Contact Terminal Board printed circuit board or PCB product offering from General Electric, as mentioned above, was originally designed and manufactured specifically for placement in their Mark VI Turbine Control System Series. The Mark VI Series, as it is known for short, exists with a set of specific possible functional settings in the control systems and management systems of General Electric-compatible gas, steam, and wind turbine automated drive assemblies. This must be considered quite the significant functional upgrade upon the Mark V Turbine Control System Series of just about the exact same full extended series title, as the Mark VI Series added the alternative energy-based wind turbine possible functional setting onto the gas and steam settings established earlier on with this IS200ECTBG1ABB Excitation Contact Terminal Board product's previous Mark V Series rollout. This IS200ECTBG1ABB Excitation Contact Terminal Board device is an edited version of the original ECTB product.
Hardware Tips and Specifications
Model number IS200ECTBG1ABB is one of the Excitation Contact Terminal Boards produced by General Electric as part of the Mark VI series. This model is one of the units within the first group of ECTB models. The two groups are ECTBG1 and ECTBG2. The IS200ECTBG1ABB model, as part of the ECTBG1 group, can only be used in redundant mode. Each board, no matter if in the first or second group of ECTB models, the board will contain two trip contact outputs, which will drive a customer lockout, as well as four Form-C relay contact outputs, controlled by an attached EMIO board. There are also auxiliary contact inputs, six in total, which will be wetted (powered) with 70 volts of direct current from the ECTB board. When being used redundantly, as this model will, the power will come from M1 and M2 power supplies. The primary manual that will be used when operating the IS200ECTBG1ABB model is the GEI-100457, but as that model is not readily available, the best manual to use, at least for information on the model, and some of its contact inputs and outputs, is the GEH-6632 Instruction Guide. The GEH-6632 guide references the other boards in the Mark VI model that the IS200ECTBG1AAA unit can be used with. The GEH-6632 Manual will also indicate what module the ECTB receives power from, which will be the EPSM module, which has the M1 and M2 power supplies.
Unfortunately enough for the sake of this IS200ECTBG1ABB Excitation Contact Terminal Board personalized product page here, the IS200ECTBG1ABB Excitation Contact Terminal Board's manual inserted above is truly just a small blurb of information that has been summarized above already. With this being the case, other alternative mediums for IS200ECTBG1ABB Excitation Contact Terminal Board hardware component and component specification information can be sourced, starting with the IS200ECTBG1ABB Excitation Contact Terminal Board functional product number itself. The IS200ECTBG1ABB Excitation Contact Terminal Board functional product number codes for a series of significant IS200ECTBG1ABB Excitation Contact Terminal Board hardware traits through a series of consecutive functional naming elements. For instance, this IS200ECTBG1ABB Excitation Contact Terminal Board product number begins with a standard insertion of the dual-functional IS200 series grouping tag delegating the IS200ECTBG1ABB Excitation Contact Terminal Board PCB's normal Mark VI Series assembly as well as its domestic original manufacture location. Some of the other relevant IS200ECTBG1ABB Excitation Contact Terminal Board PCB qualities indicated in this manner include its:
- ECTB functional product acronym
- Group one Mark VI Series grouping
- Normal PCB coating style
- Three-fold revision total
