About the IS200HFPAG1ABB
The IS200HFPAG1ABB printed circuit board is one of several high-frequency AC/Fan power supply boards available through AX Control. These boards are typically in-stock and ready to ship. The IS200HFPAG1ABB was originally manufactured by General Electric as part of the company’s Mark VI turbine control system. This Speedtronic system was one of the last turbine control systems distributed by General Electric in the Speedtronic series. This IS200HFPAG1ABB High Frequency Power Supply Board's greater Mark VI Turbine Control System Series is actually generally able to attract a consistent niche demand within the greater figurative automated industrial promotional marketplace given its status as one of the very final-developed GE Mark product series iterations to incorporate the patented Speedtronic control system technology across a range of offerings.
Hardware Tips and Specifications
The IS200HFPAG1ABB is built to receive an AC or DC input voltage. It then converts this voltage into output voltages. The board has four stab-on connectors that are used for voltage inputs and includes eight plug connectors that can be used for voltage outputs. There are four onboard fuses that help protect the circuitry on the circuit board. Additionally, the board has two LED indicators that help provide status updates to voltage outputs. Other components on the IS200HFPAG1ABB include a self-oscillating power supply inverter. The board also has several heat sinks to help offset heat from components. The board is marked with the board identification number, the GE logo, and codes that will help with wiring and location. The board has no configurable hardware. When replacing the IS200HFPAG1ABB board, you should ensure power has been removed from the drive for several minutes before beginning the procedure. This allows capacitors to fully discharge. Complete instructions for installation or removal of this board can be found through original manuals or data sheets from General Electric. AX Control can help with sourcing copies of these documents if you no longer have access to your original copies.
According to this IS200HFPAG1ABB High Frequency Power Supply Board device's originally-developed instructional manual materials made available to the IS200HFPAG1ABB High Frequency Power Supply Board manuals tab above for your every convenience of research, this IS200HFPAG1ABB High Frequency Power Supply Board device's front-facing metallic installation faceplate has been included in its normal Mark VI Series assembly version for crucial installation purposes specifically in a VME Rack Mounting Assembly. This IS200HFPAG1ABB High Frequency Power Supply Board device's VME Rack Faceplate has two total LED indicators that each identify their own specific and important IS200HFPAG1ABB High Frequency Power Supply Board device functional fault statuses. This IS200HFPAG1ABB High Frequency Power Supply Board product's DS1 label-designated LED is responsible for indicating a normative ON 17.7/19.1 V ac output status when glowing, and when it is not glowing, HFPA product's fourth fuse must be checked for a blow. This IS200HFPAG1ABB High Frequency Power Supply Board's secondary DS2-labeled fuse is ON when the 48/52 V ac and dc output is considered to be OK; when powered off, the IS200HFPAG1ABB product administrator must check its very first fuse. This IS200HFPAG1ABB device is edited from the base High Frequency Power Supply Board through its:
- A-rated primary functional revision
- B-rated secondary functional revision
- B-rated artwork configuration revision
