About the IS200HFPAG1AEC
The IS200HFPAG1AEC is a GE Speedtronic board component. It is designed to function as a High-Frequency AC/Fan Power supply board that takes incoming ac or dc inputs and turns them into the proper output for connected devices.
The IS200HFPAG1AEC has eight plug connectors on its surface to route output voltages. There are four stab-on connectors dedicated to incoming voltages. The board has four fuses across its surface to protect circuits, as well as one variable resistor. The fuses are (FU1) 250 V, 2.5 A, (FU2) 250V, 1.0 A, (FU3) 600 V, 2.0 A, and (FU4) 250 V, 4.0 A. It also has a wide variety of resistors, capacitors, and diodes made from a number of materials.
The IS200HFPAG1AEC has two LED indicators on its surface, one near the left edge and the other toward the center of the board. Both LEDs are green. One LED is labeled “17 V OK”; this is lit when the 17.7 VAC output is okay. If it is not lit, you should check fuse number four. The second LED is labeled “48 V OK”; it is lit when the 48 VAC/DC output is okay. If it is not lit, you should check fuse number one.
The IS200HFPAG1AEC is a multipurpose board and, as such, may be mounted in several locations within the rack system. It is typically mounted somewhere near a fan enclosure or a board rack in its own plastic carrier. For full installation instructions, it is best to refer back to GE manuals or data sheets.
