IS200IGEHG1A

Product Description

The IS200IGEHG1A IGBT Passive Interface Board is used in GE Innovation Series Drives to passively interface with the IGBT gate terminals for the drives. The IS200IGEHG1A can be used in simplex or in triple redundant applications as necessary for the specific needs of the drive in which it is installed. 

The IS200IGEHG1A is an IGBT Passive Interface Board that supplies the passive output stage interface parts needed at IGBT gate terminals for drives within the Innovation Series.  It is used with dual IGBT modules and uses axial gating resistors sized as fuse elements. The board performs a normalizing function relative to the Phase Interface and Control Board (IS200PICH.)

The IS200IGEHG1A is a smaller board with few components. It is built with the following features:

• Two plug components (P1 and P2,)
• Six eyelet connectors (E1 through E6,) that are made from factory-drilled holes ringed by a conductive material.  
• The board has two diodes for transient voltage suppression 
• A high voltage diode.
• A gate ON and a gate OFF resistor, as well as a bleed resistor.
• Two light emitting diodes that are located on opposite sides of the board. When IGBTs are gated ON, these components will light up.

The IS200IGEHG1A has no fuses and has no adjustable hardware.  While the board does have four TP test points, these are for factory use only  and are not intended for users to access. If more information about the board layout or its components is needed, GE’s library of manuals, user guides, or data sheets should be consulted for this information.