IS200JPDBG1A

About the IS200JPDBG1A

The IS200JPDBG1A is a board component made by GE for the Mark VI system. The MKVI is one of the last of the Speedtronic series designed by General Electric for the management of gas and steam turbines.   The Mark VI exceeds elevation code EN50178, exceeds dust contaminants code IEC 529, and exceeds humidity code EN50178. The MKIV can be used in humidity of 5% to 95% non-condensing.  

The IS200JPDBG1A is part of the IS2020JPDB AC module.  Power enters this module through the IS200JPDBG1A board.  The circuit board provides output for bulk 28 VDC control power supplies. This board has passive monitoring circuits designed for status feedback and ac magnitudes of all fused circuits.  The ribbon cable connectors on the board are used for both monitoring circuits and for the pass-through of monitoring signals. The board has two ribbon cable connectors.

The IS200JPDBG1A is built with six on/off toggle switches.  The board has eight fuses, six of which line up with the switches mentioned above.  The board has ten plug connections. This includes eight 3-position plugs including six labeled JAC1 through JAC6, a 5-position plug labeled AC to JPDF, and a 9-position plug labeled AC Input.   Other components located on the IS200JPDBG1A include TP test points, resistors, transistors, capacitors, and conduction sensors.

The AX Control warehouse team uses best shipping practices to protect your purchase during transit.  This includes the use of anti-static sleeves or wraps on static-sensitive boards. Our team will be happy to provide you with a shipping quote upon request.