About the IS200VTCCH1BBB
This IS200VTCCH1BBB Thermocouple Input Card product offering from General Electric was originally designed and manufactured specifically for the mark Vi Turbine Control System Series, as revealed just above through our brief product description. This IS200VTCCH1BBB Thermocouple Input Card device's greater Mark VI Turbine Control System Series, as you have probably been able to guess based off of its full extended series name alone, has a set of specific applications in the control and management systems of Mark Series-compatible gas, steam, and even wind turbine automated drive systems; a noticeable improvement upon the previous Mark V Series's limited steam and gas turbine possible applications. This IS200VTCCH1BBB Thermocouple Input Card product's greater Mark VI Series is additionally seen as the attractive GE product series given the fact that it is one of the final-developed GE Mark product series to incorporate the patented Speedtronic control system technology into its various offerings.
Hardware Tips and Specifications
The IS200VTCCH1BBB model is a Thermocouple Input board. This card is used with general-purpose inputs and outputs which provide interfacing of up to twenty-four thermocouples. The twenty-four thermocouple inputs used with this board are S, K, T, J, or E inputs. Please note that these models can be either grounded or ungrounded. When performing the interface there are two different termination board types, barrier-type or box-type; it will interface to a sole barrier-type termination board or two box-type termination boards. If the VTCC card is being used with the Backup Protection Module a potential of up to nine more thermocouples can be provided. This IS200VTCCH1BBB Thermocouple Input Card is a General Electric Mark Series product that has been specially designed to fit in one of the slots of a greater VME Rack Mounting Assembly, as evidenced through its normal Mark VI Series assembly's possession of a front-facing metal installation faceplate. Because of this mounting strategy, it can be determined that the entire base printed circuit board of this IS200VTCCH1BBB Thermocouple Input Card product goes without the typical factory-drilled installation holes seen in most Mark VI Series products. Generally, this IS200VTCCH1BBB product's base printed circuit board is reinforced through a standard series of voltage-limiting hardware components and component specifications including different styles of Mark VI Series capacitors, resistors, transistors, and finally specialized integrated circuits.
The main components on the faceplate of the IS200VTCCH1BBB card are two ports labeled parallel or serial. At the top of the card, there are three LEDs which are labeled run, fail and status. Each of the LEDs has a different color to correspond with the LED. The typical colors of the LEDs are red, yellow, and green. The status LED is yellow, the run LED is green, and the fail LED will be red. The IS200VTCCH1BBB board has the ability to be used with a Simplex DIN-Rail Mounted Terminal Board. The DIN Euro Size Terminal Board associated with the VTCC is the DTTC. The DTTC model has twelve points and used thermocouple temperature inputs with a single cold junction reference when being used with this board. If performing a linearization function for the individual thermocouples it will be done through the software on the VTCC model. This IS200VTCCH1BBB Thermocouple Input Card is actually not the originally designed and produced item of its specific Mark VI Turbine Control System Series functionality, as that would truthfully be the IS200VTCCH1 parent printed circuit board product notably not making use of this IS200VTCCH1BBB device's three significant product revisions.
