About the IS2020ISUCG1A
The IS2020ISUCG1A is a GE Mark VI Control Module. Mark VI is the third generation of gas and steam turbine management systems from General Electric that runs with TMR (Triple Module Redundant) architecture, meaning that it has three separate and complete Control Modules, power supplies, and IONets. The IS2020ISUCG1A is designed to be one of those three independent modules. This IS2020ISUCG1A device's greater Mark VI Turbine Control System Series, as it is called through its full GE-developed extended product series title, exists with a specific set of possible functional product applications in the control and management systems of GE-compatible gas, steam and wind turbine automated drive assemblies, which is a significant functional upgrade upon the Mark VI Series of a similar name.
Hardware Tips and Specifications
The IS2020ISUCG1A is built with termination boards and I/O cards that contain a TMS320C32 DSP processor that will digitally filter data before converting it to 32 bit IEEE-854 floating point format. The Control Module contains an internal communications card, a main processor card, and may be fitted with an optional flash disk card. The main processor card takes up two slots and the others take up one. The main processor card will execute the bulk of application software at 10/20/40 ms depending on application requirements. The IS2020ISUCG1A communicates data with other modules in the Mark VI control system using IONet. The VCMI card in the Control Module acts as the bus master. This communicates on an Ethernet 10Base2 network to slave stations. It is important to note that while the IS2020ISUCG1A is used for control, monitoring, and protection functions, some applications will require backup protection. An example is emergency overspeed protection. This is always provided for turbines without a mechanical overspeed bolt, and in this application, the IONet is extended to a Backup Protection Module available in simplex or triple redundant forms.
AX Control will carefully pack and protect the IS2020ISUCG1A with a static-reducing sleeve during shipment. Please refer to any retained manuals or data sheets from GE for safety data and installation instructions. This IS2020ISUCG1A Single Unit Controller Module was made for General Electric's Mark VI Turbine Control System Series, and as such, is not followed onto the internet by all too many originally-developed instructional manual materials, which means that the IS2020ISUCG1A functional product number itself can be embraced as a significant functional source of IS2020ISUCG1A device hardware component and component specification information. The IS2020ISUCG1A functional product number is started off through the IS200 GE-developed functional naming chunk that is considered dual-functional as it assert s both this IS2020ISUCG1A device's special modular Mark VI Series assembly version as well as its domestic original location of GE manufacture. Some of the other important IS2020ISUCG1A Modular Assembly qualities indicated through this characteristic medium have to include its:
- ISUC functional product acronym
- Group one Mark VI Series grouping
- Normal PCB coating style
- A-rated functional product revision
