IS205SVMAG1A

About the IS205SVMAG1A

The IS205SVMAG1A is a General Electric Mark VI board component.  The Mark VI is a platform for the management of mechanical drive and generator applications of gas and steam turbines.  It can also be used for the integration of balance of plant controls. The Mark VI is a complete control, monitoring, and protection solution that uses centralized control.  The Central Control Module brings in inputs via termination boards mounted into 13- or 12- slot VME card racks. This accumulated data can be accessed via a connected Operator Interface, which allows the user access to software maintenance tools.

The IS205SVMAG1A is a small auxiliary card.  It functions as a voltage monitor. It has a board connector (P1) that is made up of ten pins that alternate between the front and the back of the card.  The auxiliary board will be soldered into place using the pins that extend from the end of the board. The board has two factory-made drill holes that can be used for drill mounts for further support of the board.

The IS205SVMAG1A is marked FA/00, ttm4-10, and 94-v0.  The board has three diodes, twelve resistors, and five capacitors.  The board has one integrated circuit, one transistor, and one resistor network array.  A resistor network array is a combination of several resistors configured into a pattern.

AX Control stores and ships all MKVI boards in anti-static wrapping.   If technical support for the board is needed, refer to publications from the manufacturer like manuals, data sheets or user guides.